Smart Repair Booths and Preparation Areas
Like all Nova Verta heated spray booth systems, CTOFs and Limited Finishing Workstations use three distinct operating modes to maximize the energy efficiency of the complete painting process. Nova Verta is one of the first and few that have a listing allowing recirculation of the make up air system during preparation and cure cycles (re-circulation with direct fired heaters is not permitted per ANSI Standards or ETL on open type models). This allows for a substantial amount of fuel and electrical savings, since many of these systems are typically operated in re-circulation 60 to 75% of the time. The only time the system is required to be in full exhaust mode is during paint application. Re-circulation can save thousands of dollars and should carefully be evaluated before purchasing. Another advantage afforded by re-circulation is faster drying times.
Preparation Stations
Using a variable frequency drive and make-up unit with a stainless steel heat exchanger, the Nova Verta system warms air and safely recirculates it through the Prep Station – without exposing operators or other shop employees to the dangers of carbon monoxide. No other prep station or paint booth provides a prep cycle that creates OSHA-mandated working conditions, heats the air, maintains air pressure, brings metal to the desired spray temperature, and generates monthly utility savings of 35% or more when compared to competitive systems in its class.
S SERIES
Pit style with gratings mm 3.960×2.220
Gratings with filters and underfilters meshes
Dry Exhaust Unit type “EE1“
N°1 electric motor of Kw 5,5 o 7,5
N°1 Centrifugal fan
Control Panel ON/OFF
Raised metal basement grating/checkered plate mm 6.140×3.680×400(h)
N°2 Ascent Ramps
Dry Exhaust Unit type “EE1“
N°1 electric motor of Kw 5,5 o 7,5
N°1 Centrifugal fan
Control Panel ON/OFF
Back flow: mm 3.700×1.040×680(h)
Dry Exhaust Unit type “EE1“
N°1 electric motor of Kw 5,5 o 7,5
N°1 Centrifugal fan
Control Panel ON/OFF
APP1 SERIES
Pit style with gratings: mm 3.960×2.220
Gratings with filters and underfilters meshes
Filtering plenum: mm 5.940×2.400 with bearing structure
N° 8 flat lighting fixtures with N° 4 neon tubes of 36 Watt each
Dry Exhaust Unit type “EE1“
N° 1 pneumatic by-pass for air recycle
Control Panel
Raised metal basement: mm 6.140×3.680×400(h)
Filtering plenum: mm 5.940×2.400 with bearing structure
N° 8 flat lighting fixtures with N° 4 neon tubes of 36 Watt each
Dry Exhaust Unit type “EE1“
N° 1 pneumatic by-pass for air recycle Control Panel
Back flow: mm 3.700×1.040×680(h)
Filtering plenum: 5.940×2.400 with bearing structure
N° 8 flat lighting fixtures with N° 4 neon tubes of 36 Watt each
Dry Exhaust Unit type “EE1“
N° 1 pneumatic by-pass for air recycle
Control Panel
APP2 SERIES
2 pit style with gratings: mm 3.960×2.220
Gratings with filters and underfilters meshes
N° 2 Filtering plenum: mm 5.940×2.400 with bearing structure
N° 16 flat lighting fixtures with N° 4 neon tubes of 36 Watt each (to. 64 neon)
N° 2 Dry Exhaust Units type “EE1“
N°2 by-pass for air recycle
Control Panel
Raised metal basement grating plate mm 6.140×3.680×400(h)
2 Filtering plenum: mm 5.940×2.400 with bearing structure
N° 16 flat lighting fixtures with N° 4 neon tubes of 36 Watt each (tot. 64 neon)
N° 2 Dry Exhaust Units type “EE1“
N° 2 pneumatic by-pass for air recycle
Control Panel
Back flow: mm 3.700×1.040×680(h)
Filtering plenum: (2x) mm 5.940×2.400 with bearing structure
N° 16 flat lighting fixtures with N° 4 neon tubes of 36 Watt each (tot. 64 neon)
N° 2 Dry Exhaust Units type “EE1“
N° 2 pneumatic by-pass for air recycle
Control Panel
MAKE-UP UNITS
Here you can create the content that will be used within the module.
18.000m³/h
1 elect. motor of Kw 5,5 (Hp 7,5)
1 centrifugal fan
Stainless steel heating exchanger
Oil burner
32.000m³/h
2 electric motor of Kw 5,5 or 7,5
2 centrifugal fans
Stainless steel heating exchanger
Oil burner
24.000m³/h
1 electric motor of Kw 5,5 or 7,5
2 centrifugal fans
Stainless steel heating exchanger
Oil burner
40.000m³/h
2 electric motor of Kw 7,5
2 centrifugal fans
Stainless steel heating exchanger
Oil burner
EXHAUST UNITS
18.000m³/h
1 eletric motor of Kw 5,5 or 7,5
1 centrifugal fan
Damper mm 600×600
Control panel ON/OFF
32.000m³/h
2 eletric motor of Kw 5,5 or 7,5
2 centrifugal fans
Damper mm 1000×1000
Control panel ON/OFF
24.000m³/h
1 eletric motor of Kw 5,5 or 7,5
2 centrifugal fans
Damper mm 800×800
Control panel ON/OFF
40.000m³/h
2 eletric motor of Kw 7,5
2 centrifugal fans
Damper mm 1000×1000
Control panel ON/OFF
Questions? Quotes? Please click the button below
Drop us an Email anytime and our customer service team will respond to you as soon as possible